Home CE Marking Events and Seminars Our People Contact Us FAQ News Terms & Conditions Technical Support  
There should be a picture here There should be a picture here
 
 
Machinery Directive
Noise Directive
EMC Directive
Pressure Equipment Directive
Radio Equipment Directive
Toys Directive
Construction Product Regulations

Construction Products Regulation (CPR)


On the 1st July 2013 the Construction Products Regulation was introduced the regulation is intended to:

       • Remove technical barriers to trade of construction products between the Member States of the European Economic Area (EEA).
       • Provide harmonized technical specifications for construction products.
       • Establish a harmonized set of rules detailing the essential performance characteristics of construction products.
       • Develop a number of Notified Bodies (organizations EU accredited to perform testing and certification under this regulation).
       • Provide for the CE marking of construction products.

The regulations do not cover the construction work itself and as a result individual member states are free to set their own requirements. This may have an impact on the performance levels of the products used.
The regulations focus on the safety and performance of completed constructions there are 7 "Basic Works Requirements":

       • Mechanical resistance and stability.
       • Safety in case of fire.
       • Hygiene health and environment.
       • Safety and accessibility in use.
       • Protection against noise.
       • Energy economy including heat retention.
       • Sustainable use of natural resources.

REGULATION (EU) No 305/2011 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 9 March 2011 laying down harmonized conditions for the marketing of construction products and repealing Council Directive 89/106/EEC. Published in the Official Journal L88, 04 April 2011

Construction Products Regulation

Reason for Change

       • Clarify and Simplify the Construction Product Directive.
       • Improve the transparency and effectiveness.
       • Increase the credibility of the directive.
       • Reduce the financial burden on manufacturers.
       • Clarify the CE marking obligation and resulting consequences of non-compliance.
       • Improve enforcement of the regulation.

The Regulation imposes legal obligations on importers and distributors to participate in ensuring the compliance of the construction products they trade in. Importers and distributors need to adopt a ‘chain of custody’ approach to ensure the relevant supporting documents are able to be transferred from the manufacturer to the end user. Furthermore, where a distributor places a product on the market under their own label, they will be treated in many respects as the manufacturer.

The regulation states that some products may be exempt these are:

       • Custom made products for a specific order, if installed by the manufacturer.
       • Products manufactured on site.
       • Products for use in traditional, heritage conservation projects.

The Regulation also clarifies the area of enforcement. All member states must designate ‘enforcing authorities’ which are empowered to restrict or remove non-compliant products from the market. In the UK, Trading Standards are the enforcing authority.
The regulation intends to reduce the financial burden of compliance for small manufacturers. As such, micro-enterprises are allowed to use specific simplified procedures to demonstrate their compliance, so long as they can be demonstrated to be equivalent.
In order to provide better access to information about the Regulation, each member state has to create a ‘product contact point’ providing independent free advice, particularly to small enterprises.

Compliance with the Regulation

The Regulation requires that products which are to be incorporated into constructions are adequately specified to ensure the satisfactory performance of the structure itself. In practice, this means that a series of product specifications have to be produced so that manufacturers have proper targets to determine their products’ performance.

The Regulation permits two methods of compliance:

       • Harmonized European Standards.
       • European Technical Assessments (ETA)

Note CE marking is only mandatory, where a harmonized standard is available against which to declare the performance of the product. Where there is no harmonized standard, the manufacturer may choose to demonstrate compliance via a relevant European Technical Assessment.
The Regulation itself does not define the required verification procedure for any particular product or group of products. Instead, a large number of Commission Decisions have followed which essentially determine whether the manufacturer can self-certify their products or the involvement of an independent body (a “notified body”) is required. There are 5 levels of verification which define whether the manufacturer or notified body are responsible for various tasks.

Harmonized Standards

The objective is to create harmonized standards for every construction product ‘permanently incorporated in the works’. So far, over 400 have been fully harmonized and their reference has been published in the Official Journal of the European Community (“the OJ”), many more are in progress or planned. A list of the Harmonized Standards can be found on the European Commission's New Approach website.
The information relevant to CE marking and declaration is always found in Annex ZA of each harmonized standard. 
For specific information on Structural Steelwork please click here EN 1090 Structural steelwork 
European Technical Assessments
The Regulation continues to allow the development of ETAs, which are specifications pertaining to a particular manufacturer and product type, particularly useful for innovative products or kits. The relevant issuing bodies are known as Technical Assessment Bodies (TABs). In order to draft a European Technical Assessment, first a European Assessment Document must be created, in response to a request by a manufacturer. This effectively sets out a consistent method of assessment agreed by all member states.
This route, although voluntary, has proved very popular, with over 3000 ETAs issued to date. Currently a list of issued ETAs can be found on the European Organization of Technical Approvals (EOTA) website. Under the Regulation a new body for the co-ordination of Technical Assessment Bodies will be formed.

Factory Production Control Requirements

In addition to declaring technical performance against the basic works requirements and in order to comply with the Regulation, products must meet certain factory production control requirements. The manufacturer must be able to demonstrate that their production methods will result in consistent product that continues to match the declared performance.

Declaration and marking

The manufacturer’s ‘declaration of performance’ must contain actual performance data in relation to the essential characteristics. This is the most important legal document in relation to the product. This must be ‘made available’ to the end user and the Regulation allows for this to be by electronic means, for example by posting on a website. Additionally, some information must be marked on the product and/or its packaging.

Useful Links

There are a number of useful resources on the CPR on the internet. In particular:
The European Commission's EUROPA web site has a great deal of information in its Construction industry section.
The UK product contact point provides information on the CPR as required by the Regulation.
Further advice:
As with all CE marking directives, the actual requirements for any product under the directives are complex and dependent on not only the product but also, the intended function within the construction. Product Declarations must support any claims made, or implied by commercial literature.
 
Services that we offer as a Notified Body

•       Product Compliance Gap analysis
CEM as experts in the arena of CE marking are best placed to be able to analyse product and determine in what areas it may need to be improved in order to meet the directives.

•       Factory Production Control Assessment
CEM are able to conduct factory production control assessments to determine that the measures in place are sufficient to ensure that all production complies with the standards applicable.

•       Testing Service
If required, CEM will arrange for equipment to be tested to ensure that it conforms to the requirements of the construction product regulations.


For further information specific to your products, please contact us at CEM and we will be pleased to discuss your needs.

Download our Construction Products Regulation flyer

Download our EN1090 flyer


Subscibe to our CPR Mailing list for future updates

Your name


Your e-mail


Message

Copyright© CEM International Ltd.